SCH 10S, 4'', Stainless Steel ASTM A403 WP316, 90 Degree Elbows, ASME B16.9

45°-90° LR and 3D ASME B16.9 Butt Weld Elbows Dimensions 

Dimensions are in millimeters unless otherwise indicated. Wall thickness (t) must be specified by customer. A & B are Center to End dimensions

Dimensional Tolerances of Butt Weld Elbows 45° & 90° LR & 3D ASME B16.9

Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted.

Note..

MSS SP-43 only covers stainless steel buttweld fittings made for use with Schedule 5S and 10S pipe and Stub Ends suitable for use with Schedule 40S pipe, as defined in ASME B36.19. The dimensions and dimensional tolerances defined in MSS SP-43 are substantially the same as those in ASME B16.9 specifications from NPS 1/2 - NPS 24. Except with regard to the outside diameter at the bevel.

Pipe elbows can be manufactured from various materials, including metals like carbon steel, stainless steel, and alloy steel, as well as non-metallic materials such as PVC (Polyvinyl Chloride) or CPVC (Chlorinated Polyvinyl Chloride). The material selection depends on factors such as the operating conditions, fluid or gas properties, temperature, pressure, and compatibility with the conveyed medium.

The primary purpose of a pipe elbow is to redirect the flow of fluid or gas along a different path, allowing pipelines to navigate around obstacles, corners, or other structures. This helps to optimize the layout and design of the piping system, ensuring efficient fluid flow, minimizing pressure drop, and reducing stress on the pipe.

A pipe elbow, also known as an elbow fitting or simply an elbow, is a type of pipe fitting used to change the direction of a pipeline. It is designed to facilitate a smooth and gradual change in the flow direction of fluids or gases within a piping system.

Specification:

Pipe Fitting Material:

Service:

Surface Treatment: Black painting, anti-rust varnish, anti-rust oil, hot-galvanized

Non-destructive Testing: penetration test, ultrasonic test, radiographic test

Certificate: CE, ISO, PED, TS, BV, CQC Certificate

Packing: Plywood Case or Pallet