Pipe Fitting Manufacturer Changrun Supplies Forged Elbows,
Size: DN80 ( 3 Inch)
Degree: 90° LR
Wall Thickness: SCH 80.
Material: ASTM A234 WP5
Standard: ANSI B16.9.
End Connection: Butt Weld
Certificates: CE, ISO, PED, TS, BV, CQC.
45°-90° LR and 3D ASME B16.9 Butt Weld Elbows Dimensions
| NPS | O.D. D |
90° LR A |
45° LR B |
90° 3D A |
45° 3D B |
| 1/2 | 21.3 | 38 | 16 | ||
| 3/4 | 26.7 | 38 | 19 | 57 | 24 |
| 1 | 33.4 | 38 | 22 | 76 | 31 |
| 1.1/4 | 42.2 | 48 | 25 | 95 | 39 |
| 1.1/2 | 48.3 | 57 | 29 | 114 | 47 |
| 2 | 60.3 | 76 | 35 | 152 | 63 |
| 2.1/2 | 73 | 95 | 44 | 190 | 79 |
| 3 | 88.9 | 114 | 51 | 229 | 95 |
| 3.1/2 | 101.6 | 133 | 57 | 267 | 111 |
| 4 | 114.3 | 152 | 64 | 305 | 127 |
| 5 | 141.3 | 190 | 79 | 381 | 157 |
| 6 | 168.3 | 229 | 95 | 457 | 189 |
| 8 | 219.1 | 305 | 127 | 610 | 252 |
| 10 | 273 | 381 | 159 | 762 | 316 |
| 12 | 323.8 | 457 | 190 | 914 | 378 |
| 14 | 355.6 | 533 | 222 | 1067 | 441 |
| 16 | 406.4 | 610 | 254 | 1219 | 505 |
| 18 | 457 | 686 | 286 | 1372 | 568 |
| 20 | 508 | 762 | 318 | 1524 | 632 |
| 22 | 559 | 838 | 343 | 1676 | 694 |
| 24 | 610 | 914 | 381 | 1829 | 757 |
| 26 | 660 | 991 | 406 | 1981 | 821 |
| 28 | 711 | 1067 | 438 | 2134 | 883 |
| 30 | 762 | 1143 | 470 | 2286 | 946 |
| 32 | 813 | 1219 | 502 | 2438 | 1010 |
| 34 | 864 | 1295 | 533 | 2591 | 1073 |
| 36 | 914 | 1372 | 565 | 2743 | 1135 |
| 38 | 965 | 1448 | 600 | 2896 | 1200 |
| 40 | 1016 | 1524 | 632 | 3048 | 1264 |
| 42 | 1067 | 1600 | 660 | 3200 | 1326 |
| 44 | 1118 | 1676 | 695 | 3353 | 1389 |
| 46 | 1168 | 1753 | 727 | 3505 | 1453 |
| 48 | 1219 | 1829 | 759 | 3658 | 1516 |
Dimensional Tolerances of Butt Weld Elbows 45° & 90° LR & 3D ASME B16.9
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 |
| Outside Diameter at Bevel (D) |
+ 1.6 - 0.8 |
1.6 | 1.6 | + 2.4 - 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 | 1.6 |
| Center to End LR (A/B) | 2 | 2 | 2 | 2 |
| Center to End 3D (A/B) | 3 | 3 | 3 | 3 |
| Nominal Pipe Size | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Diameter at Bevel (D) |
+ 4 - 3.2 |
+ 6.4 - 4.8 |
+ 6.4 - 4.8 |
+ 6.4 - 4.8 |
| Inside Diameter at End | 3.2 | 4.8 | + 6.4 - 4.8 |
+ 6.4 - 4.8 |
| Center to End LR (A/B) | 2 | 2 | 3 | 5 |
| Center to End 3D (A/B) | 3 | 3 | 6 | 6 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness |
|||
Note..
MSS SP-43 only covers stainless steel buttweld fittings made for use with Schedule 5S and 10S pipe and Stub Ends suitable for use with Schedule 40S pipe, as defined in ASME B36.19. The dimensions and dimensional tolerances defined in MSS SP-43 are substantially the same as those in ASME B16.9 specifications from NPS 1/2 - NPS 24. Except with regard to the outside diameter at the bevel.
A pipe elbow, also known as an elbow fitting or simply an elbow, is a type of pipe fitting used to change the direction of a pipeline. It is designed to facilitate a smooth and gradual change in the flow direction of fluids or gases within a piping system.
Pipe elbows typically have a curved or bent shape, resembling the shape of a bent arm or elbow joint, hence the name. They are available in different angles, commonly 45 degrees, 90 degrees, and 180 degrees, although other angles may also be available depending on the specific application requirements.
Specification:
| Elbow Degree |
45, 90, 180 Deg. Long/Short Radius Elbows |
| Size Range |
Carbon Steel: 1/2”-96” Stainless Steel: 1/2” – 24” (Seamless and ERW), 26” – 72” (Welded) |
| Schedule |
SCH5S, 10S, 40S, STD, 80S, XS, XXS, SCH10-SCH160 |
| Pressure Ratings |
Threaded fittings: 2000lbs, 3000lbs, 6000lbs. Socket-weld fittings: 3000lbs, 6000lbs, 9000lbs. |
| Pipe Fitting Standard |
ANSI B16.9, ANSI B16.28, DIN 2605, DIN2615, DIN2616, JIS B2312, JIS B2313, ANSI/ASME B16.11, MSS SP-43, SP-79, SP-83, SP-95-, SP-97, BS3799, JIS B2316 |
Pipe Fitting Material:
| Carbon Steel |
ASTM A 234 WPB, A420 WPL1, WPL3, WPL6, ASTM A860 WPHY 42, WPHY52, WPHY60, WPHY65, WPHY70 |
| Stainless Steel |
ASTM A403 WP304/304L, WP316/316L, WP321, WP347 |
| Alloy Steel |
ASTM A234 WP1, WP5, WP9, WP11, WP12, WP22, WP91 |
| Duplex & Super Duplex Steel |
ASTM A815 UNS S31803, UNS S32750, UNS S32760 |
| Nickel & Nickel Alloy |
Nickel 200, Nickel 201, Monel 400, Incoloy 800/800H/800HT/825/901/926, A-286, Inconel 600/601/625/718/X-750, Hastelloy B/B-2/C-4/C-22/C-276, Invar 36 |
| Titanium & Titanium Alloy |
ASTM B265 Gr.1, Gr.2, Gr.7, Gr.12, ASTM B381 F1, F2, F7, F12 |
Service:
Surface Treatment: Black painting, anti-rust varnish, anti-rust oil, hot-galvanized
Non-destructive Testing: penetration test, ultrasonic test, radiographic test
Certificate: CE, ISO, PED, TS, BV, CQC Certificate
Packing: Plywood Case or Pallet
Pipe Fitting Manufacturer Changrun Supplies Forged Elbows, Size: DN100 (4 Inch) Degree: 180° Wall Thickness: SCH 40. Material: ASTM A403 347H Standard: ANSI B16.9. End Connection: Butt Weld Certificates: CE, ISO, PED, TS, BV, CQC.
Pipe Fitting Manufacturer Changrun Supplies Forged Elbows, Size: DN100 (4 Inch) Degree: 90° Wall Thickness: SCH XS. Material: ASTM 304H Standard: ANSI B16.9. End Connection: Butt Weld Certificates: CE, ISO, PED, TS, BV, CQC.
Pipe Fitting Manufacturer Changrun Supplies Forged Elbows, Size: DN40 ( 1-1/2 Inch) Degree: 90° LR Wall Thickness: SCH 40. Material: ASTM A403 WP316/316L Standard: ANSI B16.9. End Connection: Butt Weld Certificates: CE, ISO, PED, TS, BV, CQC.
Pipe Fitting Manufacturer Changrun Supplies Forged Elbows, Size: DN25 (1 Inch) Degree: 90° LR Wall Thickness: SCH XS. Material: ASTM A403 WP304/304L Standard: ANSI B16.9. End Connection: Butt Weld Certificates: CE, ISO, PED, TS, BV, CQC.
Pipe Fitting Manufacturer Changrun Supplies Forged Elbows, Size: DN80 ( 3 Inch) Degree: 90° LR Wall Thickness: SCH 80. Material: ASTM A234 WP5 Standard: ANSI B16.9. End Connection: Butt Weld Certificates: CE, ISO, PED, TS, BV, CQC.
Pipe Fitting Manufacturer Changrun Supplies Forged Elbows, Size: DN90 (3-1/2 Inch) Degree: 90° Wall Thickness: SCH STD. Material: ASTM A234 WPB Standard: ANSI B16.9. End Connection: Butt Weld Certificates: CE, ISO, PED, TS, BV, CQC.
Pipe Fitting Manufacturer Changrun Supplies Forged Elbows, Size: 159MM Degree: 90° Wall Thickness: 5MM. Material: ASTM A403 WP316L Standard: ANSI B16.9. End Connection: Butt Weld Certificates: CE, ISO, PED, TS, BV, CQC.
Pipe Fitting Manufacturer Changrun Supplies Forged Elbows, Size: DN50 (2 Inch) Degree: 90° Wall Thickness: SCH 40. Material: ASTM A815 UNS 31803 Standard: ANSI B16.9. End Connection: Butt Weld Certificates: CE, ISO, PED, TS, BV, CQC.
IPv6 Network Supported