内页banner
Blind Flange
Home Blind Flange

Blind Flange 6'', 300#, RF, ASTM A182 F317, ASME B16.5

Blind Flange 6'', 300#, RF, ASTM A182 F317, ASME B16.5

Forged Blind Flange Manufacturer Changrun Supplies Forged BL Flanges,

Dimension: 6 Inch (DN150)

Class rating: 300lb 

Material: ASTM A182 F317

Flange face: RF

Certificates: CE, ISO, PED, TS, BV, CQC.

A blind flange, also known as a blank flange, is a type of flange that is used to close the end of a pipe or vessel. It is a solid disk with no opening or bore in the center. Blind flanges are available in various materials to suit the specific requirements of the piping system, including carbon steel, stainless steel, alloy steel, and other alloys. They are manufactured in different sizes and pressure ratings to match the dimensions and rating of the corresponding pipeline.

   

 

ASME B16.5 Class 300   

 RF Blind Flange

Nominal
Pipe Size
OD of
Flange
(D)
Thickness
of Flange
(B)
Dia of
Raised Face
(G)
No of
Bolt
Holes
Dia of
Bolt Holes
(L)
Dia of
Bolt
(inches)
Dia of
Bolt Circle
(K)
Approx
Weight
(kg)
1/2 88.9 11.2 35.1 4 15.7 1/2 60.5 0.5
3/4 98.6 12.7 42.9 4 15.7 1/2 69.9 1
1 108 14.2 50.8 4 15.7 1/2 79.2 1
1-1/4 117.3 15.7 63.5 4 15.7 1/2 88.9 1
1-1/2 127 17.5 73.2 4 15.7 1/2 98.6 2
2 152.4 19.1 91.9 4 19.1 5/8 120.7 2
2-1/2 177.8 22.4 104.6 4 19.1 5/8 139.7 3
3 190.5 23.9 127 4 19.1 5/8 152.4 4
3-1/2 215.9 23.9 139.7 8 19.1 5/8 177.8 6
4 228.6 23.9 157.2 8 19.1 5/8 190.5 8
5 254 23.9 185.7 8 22.4 3/4 215.9 9
6 279.4 25.4 215.9 8 22.4 3/4 241.3 12
8 342.9 28.4 269.7 8 22.4 3/4 298.5 20
10 406.4 30.2 323.9 12 25.4 7/8 362 32
12 482.6 31.8 381 12 25.4 7/8 431.8 50
14 533.4 35.1 412.8 12 28.4 1 476.3 64
16 596.9 36.6 469.9 16 28.4 1 539.8 82
18 635 39.6 533.4 16 31.8 1-1/8 577.9 100
20 698.5 42.9 584.2 20 31.8 1-1/8 635 129
24 812.8 47.8 692.2 20 35.1 1-1/4 749.3 195

 

 

Blind flanges are typically used for the following purposes:

1. Closure: When a section of the pipeline needs to be closed off temporarily or permanently, a blind flange is installed at the end to seal it completely. This helps prevent flow through the pipe and ensures the integrity of the system.

2. Inspection and Testing: Blind flanges are often used during pressure testing, leak testing, or visual inspection of the piping system. They provide a solid barrier that allows for safe and controlled testing without any fluid leakage.

3. Future Expansion: In situations where additional sections of piping may be added in the future, a blind flange can be used as a temporary closure until the expansion occurs. It provides a convenient and secure way to close off the end of the pipe until it is ready for connection.

4. Aesthetics and Safety: Blind flanges can be used for aesthetic purposes in situations where the end of a pipe needs to be covered or concealed. They also provide a safety measure by capping off unused or open ends of pipes, eliminating the risk of accidental entry or injury.

 

 

 

The company has equipped facilities for manufacturing. Now it has five forging machines, one of which is forging machine whose capacity reaches 3600-ton, one is numerical control ring roll whose capacity reaches 6300 mm (Diameter), one is 1.5 ton hammers and the other two are 1-ton air hammers. There are 7 gas generators used for forge heating, 16 industrial resistance furnaces for heat treatment and more than 80 metal processing equipment among which there is a numeric control Standing Lathe whose processing diameter can reach 5meters. The company has an annual production capacity of 50,000 tons of middle and high-pressure flanges and various steel forgings for boilers and pressure vessels. The maximum pressure of manufactured flanges can reach 2500Lb, the maximum diameter can reach about 6 meters and the maximum weight of unit forging can reach 30 tons.

 

 

Wuxi Changrun uses plastic protective covers to protect the flange sealing surface, and then uses waterproof plywood boxes for packaging. Waterproof wooden box packaging is suitable for sea transportation.

 

 

Material:  

Carbon Steel

ASTM A105, ASTM A350 LF1, ASTM A350 LF2, S235JR, P245GH, P250GH, P280GH,

ASTM A694 F42, ASTM A694 F46, ASTM A694 F52, ASTM A694 F56, ASTM A694 F60, ASTM A694 F65, ASTM A694 F70, etc

Stainless Steel

ASTM A182 F304, ASTM A182 F304L, ASTM A182 F304H, ASTM A182 F316, ASTM A182 F316L, ASTM A182 F317, ASTM A182 F317L, ASTM A182 F321, ASTM A182 F310, ASTM A182 F347, etc.

Alloy Steel

ASTM A182 F1, ASTM A182 F5, ASTM A182 F9, ASTM A182 F11, ASTM A182 F22, ASTM A182 F91, etc.

Duplex and super duplex steel

ASTM A815 UNS S31803, ASTM A815 UNS S32205, ASTM A815 UNS S32750, ASTM A815 UNS S32760  

 

 

Specification:

Size Range: DN15-DN2000, 1/2 Inch-80 Inch 

Face Finish: RF, FF, RTJ, TF, GF

Standard & Pressure Ratings:  

1. ANSI/ASME/ASTM B16.5/B16,47: 150 LB, 300 LB, 400 LB, 600 LB, 900 LB, 1500 LB, 2500 LB

2. DIN/UNI: PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160, PN250, PN320

 

 

Service:

Surface Treatment: Black painting, anti-rust varnish, anti-rust oil, hot-galvanized

Non-destructive Testing: penetration test, ultrasonic test, radiographic test

Certificate: CE, ISO, PED, TS, BV, CQC Certificate

Packing: Plywood Case or Pallet

 

Blind flanges are typically used for the following purposes:

1. Closure: When a section of the pipeline needs to be closed off temporarily or permanently, a blind flange is installed at the end to seal it completely. This helps prevent flow through the pipe and ensures the integrity of the system.

2. Inspection and Testing: Blind flanges are often used during pressure testing, leak testing, or visual inspection of the piping system. They provide a solid barrier that allows for safe and controlled testing without any fluid leakage.

3. Future Expansion: In situations where additional sections of piping may be added in the future, a blind flange can be used as a temporary closure until the expansion occurs. It provides a convenient and secure way to close off the end of the pipe until it is ready for connection.

4. Aesthetics and Safety: Blind flanges can be used for aesthetic purposes in situations where the end of a pipe needs to be covered or concealed. They also provide a safety measure by capping off unused or open ends of pipes, eliminating the risk of accidental entry or injury.

 

 

 

The company has equipped facilities for manufacturing. Now it has five forging machines, one of which is forging machine whose capacity reaches 3600-ton, one is numerical control ring roll whose capacity reaches 6300 mm (Diameter), one is 1.5 ton hammers and the other two are 1-ton air hammers. There are 7 gas generators used for forge heating, 16 industrial resistance furnaces for heat treatment and more than 80 metal processing equipment among which there is a numeric control Standing Lathe whose processing diameter can reach 5meters. The company has an annual production capacity of 50,000 tons of middle and high-pressure flanges and various steel forgings for boilers and pressure vessels. The maximum pressure of manufactured flanges can reach 2500Lb, the maximum diameter can reach about 6 meters and the maximum weight of unit forging can reach 30 tons.

 

 

Wuxi Changrun uses plastic protective covers to protect the flange sealing surface, and then uses waterproof plywood boxes for packaging. Waterproof wooden box packaging is suitable for sea transportation.

 

 

Material:  

Carbon Steel

ASTM A105, ASTM A350 LF1, ASTM A350 LF2, S235JR, P245GH, P250GH, P280GH,

ASTM A694 F42, ASTM A694 F46, ASTM A694 F52, ASTM A694 F56, ASTM A694 F60, ASTM A694 F65, ASTM A694 F70, etc

Stainless Steel

ASTM A182 F304, ASTM A182 F304L, ASTM A182 F304H, ASTM A182 F316, ASTM A182 F316L, ASTM A182 F317, ASTM A182 F317L, ASTM A182 F321, ASTM A182 F310, ASTM A182 F347, etc.

Alloy Steel

ASTM A182 F1, ASTM A182 F5, ASTM A182 F9, ASTM A182 F11, ASTM A182 F22, ASTM A182 F91, etc.

Duplex and super duplex steel

ASTM A815 UNS S31803, ASTM A815 UNS S32205, ASTM A815 UNS S32750, ASTM A815 UNS S32760  

 

 

Specification:

Size Range: DN15-DN2000, 1/2 Inch-80 Inch 

Face Finish: RF, FF, RTJ, TF, GF

Standard & Pressure Ratings:  

1. ANSI/ASME/ASTM B16.5/B16,47: 150 LB, 300 LB, 400 LB, 600 LB, 900 LB, 1500 LB, 2500 LB

2. DIN/UNI: PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160, PN250, PN320

 

 

Service:

Surface Treatment: Black painting, anti-rust varnish, anti-rust oil, hot-galvanized

Non-destructive Testing: penetration test, ultrasonic test, radiographic test

Certificate: CE, ISO, PED, TS, BV, CQC Certificate

Packing: Plywood Case or Pallet

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
End Blind Flange
Duplex & Super Duplex Steel ASTM A815 UNS S31803 Blind Flange, Forged, RF, 150LB, B16.5, 5 Inch

Forged Blind Flange Manufacturer Changrun Supplies Forged BL Flanges, Dimension: 5 Inch (DN125) Class rating: 150lb  Material: ASTM A815 UNS S31803 Flange face: RF, FF, RTJ, TF, GF. Certificates: CE, ISO, PED, TS, BV, CQC.

blind flange
ASTM A182 F304/ 304L Forged Blind Flange, RF, ASME/ANSI B16.5, 150LB, 6 inch

Forged Blind Flange Manufacturer Changrun Supplies Forged BL Flanges, Dimension: DN15-DN2000 (1/2-80 Inch), Class rating: 150-2500 LB (PN6-PN420), Flange face: RF, FF, RTJ, TF, GF. Certificates: CE, ISO, PED, TS, BV, CQC.

Blank Flange
Stainless Steel Blind Flange, Forged, A182 F316/F316 L, FF, 300LB, B16.5, 8 Inch

Forged Blind Flange Manufacturer Changrun Supplies Forged BL Flanges, Dimension: 8 Inch (DN200) Class rating: 300lb Flange face: RF, FF, RTJ, TF, GF.   Certificates: CE, ISO, PED, TS, BV, CQC.

A105 Forged Blind Flange
CS ASTM A105N Forged Blind Flange, 36 Inch, RF, 600 LB, B16.47A

  Forged Blind Flange Manufacturer -Changrun Supplies Forged BL Flanges, DN15-DN2000 (1/2-80 Inch), 150-2500 LB (PN6-PN420), Flange face: RF, FF, RTJ, TF, GF. Materials: Carbon Steel: ASTM A105, ASTM A350 LF1, ASTM A350 LF2.

Stainless Blind Flange
ASTM A815 UNS S32205 Blind Flange, 3/4 Inch, 150 Class Rating, B16.5, RF

Forged Blind Flange Manufacturer Changrun Supplies Forged BL Flanges, Dimension: 3/4 Inch (DN20) Class rating: 150lb  Material: ASTM A815 UNS S32205  Flange face: RF Certificates: CE, ISO, PED, TS, BV, CQC.

RTJ Blind Flange
RTJ, ASME A105 Forged BL, B16.5, 4 Inch, Class 1500, Black Painting

  Forged Blind Flange Manufacturer Changrun Supplies Forged BL Flanges, DN15-DN2000 (1/2-80 Inch), 150-2500 LB (PN6-PN420), Flange face: RF, FF, RTJ, TF, GF. Certificates: CE, ISO, PED, TS, BV, CQC.

B16.47A Blind Flange
B16.47A, CS A105N Blind Flange, 42 Inch, Forging, RF, #300 Class

Forged Blind Flange Manufacturer -Changrun Supplies Forged BL Flanges, DN1500 (42 Inch), 300 LB (PN6-PN420), Flange face: RF. Materials: Carbon Steel: ASTM A105, ASTM A350 LF1, ASTM A350 LF2.

Stainless Steel Flange
ASTM A182 F316 Forged Blind Flange, 150#, RF, B16.5

Forged Blind Flange Manufacturer Changrun Supplies Forged BL Flanges, Dimension: 2 Inch (DN50) Class rating: 150lb  Material: ASTM A182 F316 Flange face: RF Certificates: CE, ISO, PED, TS, BV, CQC.

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

whatsApp

contact