1-1/2'', 45 Degree Elbow, Sch 80S, LR, Carbon Steel ASTM A860 WPHY 42

45°-90° LR  ASME B16.9 Butt Weld Elbows Dimensions 

Dimensions are in millimeters unless otherwise indicated. Wall thickness (t) must be specified by customer. A & B are Center to End dimensions

Dimensional Tolerances of Butt Weld Elbows 45° & 90° LR & 3D ASME B16.9

Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted.

Note..

MSS SP-43 only covers stainless steel buttweld fittings made for use with Schedule 5S and 10S pipe and Stub Ends suitable for use with Schedule 40S pipe, as defined in ASME B36.19. The dimensions and dimensional tolerances defined in MSS SP-43 are substantially the same as those in ASME B16.9 specifications from NPS 1/2 - NPS 24. Except with regard to the outside diameter at the bevel.

Elbows belong to pipe fittings, and the purpose of using elbows in pipelines is to change the direction of the pipeline. Elbows are used at the turning point of the pipeline to change the direction of the pipeline. The angles of elbows include 15 degree elbows, 30 degree elbows, 45 degree elbows, 60 degree elbows, 90 degree elbows, and 180 degree elbows. The type of elbow including long-radius elbows, short-radius elbows, seamless elbows, and welded elbows. These are the most commonly used elbow angles, which need to be ordered and made according to the installation needs of the construction site project.

Long and short-radius elbows differ in their radius of curvature, with long-radius elbows having a larger radius than short-radius elbows. Seamless elbows are made from a single piece of steel and are available in a wider range of sizes and wall thicknesses than welded elbows.The materials can be divided into stainless steel elbows, carbon steel elbows, alloy steel elbows, and duplex steel elbows. When connecting elbows and pipelines, welding is used. Therefore, for the convenience of welding, the ends of general elbows need to be bevelled.

A pipe elbow, also known as an elbow fitting or simply an elbow, is a type of pipe fitting used to change the direction of a pipeline. It is designed to facilitate a smooth and gradual change in the flow direction of fluids or gases within a piping system.

Specification:

Pipe Fitting Material:

Service:

Surface Treatment: Black painting, anti-rust varnish, anti-rust oil, hot-galvanized

Non-destructive Testing: penetration test, ultrasonic test, radiographic test

Certificate: CE, ISO, PED, TS, BV, CQC Certificate

Packing: Plywood Case or Pallet