Pipe Fitting Manufacturer Changrun Supplies Forged Stub End,
Size: DN500 (20 Inch),
Wall Thickness: SCH 80.
Material: ASTM A234 WPB.
Standard: ANSI B16.9.
End Connection: Butt Weld
Certificates: CE, ISO, PED, TS, BV, CQC.
A stub end is a type of pipe fitting that is used in piping systems to connect pipes of different materials or sizes. It is essentially a short length of pipe with one end designed to be welded or soldered to the pipe, and the other end has a flared or beveled surface. Stub ends are buttweld fittings that can be used (in combination with a lap joint flange) alternatively to welding neck flanges to make flanged connections. The main purpose of a stub end is to allow for easy installation, disassembly, and maintenance of the piping system. it can reduce the total cost of flanged joints for piping systems in high material grades (as the lap joint flange does not need to be of the same material of the pipe and the stub end but can be a lower grade); it speeds up the installation process, as the lap joint flange can be rotated to facilitate the alignment of the bolt holes.
Specification:
Size Range: Carbon Steel: 1/2”-96”
Stainless Steel: 1/2” – 24” (Seamless and ERW), 26” – 72” (Welded)
Schedule: SCH5S, 10S, 40S, STD, 80S, XS, XXS, SCH10-SCH160
Pressure Ratings: Threaded fittings: 2000lbs, 3000lbs, 6000lbs.
Socket-weld fittings: 3000lbs, 6000lbs, 9000lbs.
Pipe Fitting Standard:
ANSI B16.9, ANSI B16.28, DIN 2605, DIN2615, DIN2616, JIS B2312, JIS B2313,
ANSI/ASME B16.11, MSS SP-43, SP-79, SP-83, SP-95-, SP-97, BS3799, JIS B2316
Pipe Fitting Material:
Carbon Steel: ASTM A 234 WPB, A420 WPL1, WPL3, WPL6,
ASTM A860 WPHY 42, WPHY52, WPHY60, WPHY65, WPHY70
Stainless Steel: ASTM A403 WP304/304L, WP316/316L, WP321, WP347
Alloy Steel: ASTM A234 WP1, WP5, WP9, WP11, WP12, WP22, WP91
Duplex & Super Duplex Steel: ASTM A815 UNS S31803, UNS S32750, UNS S32760
Nickel & Nickel Alloy: Nickel 200, Nickel 201, Monel 400,
Incoloy 800/800H/800HT/825/901/926, A-286,
Inconel 600/601/625/718/X-750,
Hastelloy B/B-2/C-4/C-22/C-276, Invar 36
Titanium & Titanium Alloy: ASTM B265 Gr.1, Gr.2, Gr.7, Gr.12,
ASTM B381 F1, F2, F7, F12
Service:
Surface Treatment: Black painting, anti-rust varnish, anti-rust oil, hot-galvanized
Non-destructive Testing: penetration test, ultrasonic test, radiographic test
Certificate: CE, ISO, PED, TS, BV, CQC Certificate
Packing: Plywood Case or Pallet
Forged Tube Sheets Manufacturer Changrun Supplies Forged Overlay Welding Tubesheet. Lagest Forging: 100MT. Max OD of tube sheets: 8 Meters. Tube hole details: positioning accuracy of up to 0.01mm, minimum aperture tolerance of 0.01mm, minimum roughness Ra0.6 in the hole. Material: Titanium ASTM B381 F1 Standards: ASTM, AISI, ASME, DIN, EN, AS, GB.
Forged WELD NECK FLANGE (WN Flange) Manufacturer Changrun Supplies Forged WN Flanges, DN125 (5 Inch), 150 LB (PN20), Wall Thickness: SCH 40. Flange face: RF, FF, RTJ, TF, GF. Material: ASTM A182 F316, ASTM A182 F316L. Certificates: CE, ISO, PED, TS, BV, CQC.
Forged SPECTACLE BLIND FLANGE ( FIGURE-8 BLIND FLANGE ) Manufacturer Changrun Supplies Forged Spectacle Flanges, DN15-DN2000 (1/2-80 Inch), 150-2500 LB (PN6-PN420). Flange face: RF, FF, RTJ, TF, GF. Material: ASTM A105. Certificates: CE, ISO, PED, TS, BV, CQC.
Forged Tube Sheets Manufacturer Changrun Supplies Forged Tubesheet. Lagest Forging: 100MT. Max OD of tube sheets: 8 Meters. Tube hole details: positioning accuracy of up to 0.01mm, minimum aperture tolerance of 0.01mm, minimum roughness Ra0.6 in the hole. Material: A105 Standards: ASTM, AISI, ASME, DIN, EN, AS, GB.
Forged Tube Sheets Manufacturer Changrun Supplies Forged Tubesheet. Lagest Forging: 100MT. Max OD of tube sheets: 8 Meters. Tube hole details: positioning accuracy of up to 0.01mm, minimum aperture tolerance of 0.01mm, minimum roughness Ra0.6 in the hole. Material: SA182 F1 Standards: ASTM, AISI, ASME, DIN, EN, AS, GB.
Forged Tube Sheets Manufacturer Changrun Supplies Forged Tubesheet. Lagest Forging: 100MT. Max OD of tube sheets: 8 Meters. Tube hole details: positioning accuracy of up to 0.01mm, minimum aperture tolerance of 0.01mm, minimum roughness Ra0.6 in the hole. Material: SA182 F1 Standards: ASTM, AISI, ASME, DIN, EN, AS, GB.
Forged SLIP-ON FLANGE (SO Flange) Manufacturer Changrun Supplies Forged SO Flanges, Dimension: DN200 (8 Inch), Class rating: 300 LB, Material: ASTM A350 LF1 LF2 Flange face: RF
Forged Nozzle Manufacturer Changrun Supplies Forged Q-Lip Nozzles. Lagest Forging: 100MT. Max OD of Flange: 8 Meters. Hole details: positioning accuracy of up to 0.01mm, minimum aperture tolerance of 0.01mm, minimum roughness Ra0.6 in the hole. Material: SS304 Standards: ASTM, AISI, ASME, DIN, EN, AS, GB. Norminal Diameter Range: 1/2” – 96”, DN15-DN2000 Normail Pressure Range: 150# - 2500# (PN6 – PN40)
IPv6 Network Supported